Oregon Scientific High Precision Body Weight Monitor with Body Fat Index GA 101 - Manual (Page 9)

9
GB
NOTE
GETTING STARTED
UNPACKING THE BODY WEIGHT MONITOR
When you unpack your Body Weight Monitor, make sure to keep all the packing materials
in a safe place, in case you need to later transport or return it for servicing. In the box, you
will find:
The Monitor 4x AA 1.5-V Batteries User Manual 4x Carpet Feet
Selecting a Location for the Body Weight Monitor
Diagram Instructions
Place the body weight Monitor on a hard, even
floor surface. Avoid thick carpeting or use the
supplied carpet feet.
Placing the Monitor on the floor will display on the LCD. This indicates that it is
calibrating. Simply leave the Monitor on the floor for 1-2 seconds to allow self-calibration.
Setting up the First Time
To set up your Body Weight Monitor:
Diagram Instructions
1. Remove and discard the clear plastic tab
inside the battery compartment.
2. Set the measurement unit:
2.1. Press and hold until “lb” flashes.
2.2. Press + or - to set unit in lb (pounds),
st-lb (stones), or kg (kilograms).
2.3. Press to confirm the change.
If “lb” or “st-lb” is selected, the unit
for your height is defaulted to feet and
inches. If “kg” is selected, the unit for
height is set to centimeters. NOTE