Oricom TP68 - Manual (Page 11)

- Setting up -
11
3.13 Access Number for International Numbers
For international numbers, the TP68 automatically replaces the “+” sign with the
IDD access number used in your country. Program this code by following the
instructions below.
A. Please follow the instructions: Display shows:
Press the MENU button once. Add entry
Turn the Jog dial as far as the “Settings” message Settings
Confirm with YES. Clock
Turn the Jog dial until the “IDD Prefix” message appears
in the display.
IDD Prefix
Confirm with YES.
Note: The IDD dialling code already entered will not be
shown in the display. Number:
Now enter your own IDD dialling code 0011 when used in
Australia or 00 when used in New Zealand
e.g. 0011
Confirm with YES. Stored =>
PBX Prefix
To exit programming mode, press the NO button twice.