Oricom TP68 - Manual (Page 21)

- Operation -
21
A. Please follow the instructions: Display shows:
Press the MENU button. Add entry
Turn the Jog dial until the message “SIM Card Access”
appears in the display.
SIM Card Access
Confirm with YES. Insert card
Now open the compartment for the SIM card and insert
the card into the holder.
Insert card
Now slide the cardholder back into the telephone and
press the YES button.
Wait ... => Pin:_
Enter your mobile phone’s four-digit PIN code. Pin: ****
Confirm the PIN code with YES. If the PIN code was not
entered correctly, you can enter the PIN code again after
a few seconds.
WARNING! Please note that there are only three attempts
available. After this, the SIM card must be revalidated with
the “master PIN” (PUK).
Copy all
Press YES once more. Card to phone
Now choose whether you want to copy the telephone
numbers from the telephone to the SIM card or from the
SIM card to the telephone by using the Jog dial.
Card to phone => Telephone numbers on the card are
copied to the telephone
Phone an Card => Telephone numbers in the telephone
are copied to the SIM card
Warning: No synchronisation takes place. Any existing
data is deleted when copying.
Card to phone
or
Phone to Card
Confirm with the YES button. Confirm (Y/N)?
Start copying with YES or cancel the function with NO.
Warning: When copying from the telephone to the SIM
card, an additional safety query is incorporated. Confirm
the message “Overwrite?” with YES.
with yes: Wait
with no: Remove card
Wait…
The completion of the copying process is confirmed in the
display.
Done and then Copy all
Press NO and remove the SIM card. Remove card
After removing, confirm with YES. SIM Card Access
Exit programming with the NO button.