Channel list, Manual register, Channel settings – Sylvania 6842THG User Manual
Page 15
15
EN
CHANNEL SETTINGS
CHANNEL LIST
The Channel List function lets you skip the unnec-
essary channels from the Channel registration list.
1
Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2
Select “CHANNEL” and press [ENTER] to con-
firm.
• Using [K /L], select “Channel List”.
• Press [ENTER].
3
Select the channel you want to skip.
• Using [K/L], select the channel.
• Press [ENTER], and the highlight on the
selected channel disappears, then the channel
is set as skip. With [CH K /L], you cannot
select the channel set as skip.
• If you want to receive the skipped channel,
select your desired channel and press
[ENTER].
• If you skip a major channel, you skip the minor
channels too.
4
To exit the setup, press [SETUP].
NOTE:
• The channel with “DTV” indicated on the display is ATSC,
otherwise the channel is NTSC.
Channel List
Channel List
DTV
8
DTV
8
DTV
6
DTV
6
9
9
DTV
48
DTV
48
58
58
27
DTV
67
Ch Select
Watch/Skip
Back
BACK
ENTER
Highlight channels for
Ch Up/Down key selection.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
ENTER
STILL
SETUP
BACK
SCREEN
MODE
INFO
-
0
ENTER
SETUP
MANUAL REGISTER
You can register remainder of channels that were
not scanned by the Autoscan function due to the
bad reception status at the initial setting.
1
Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2
Select “CHANNEL” and press [ENTER] to con-
firm.
• Using [K /L], select “Manual Register”.
• Press [ENTER].
3
Select the channel you want to add.
• Using Channel number buttons, select your
desired channel.
• Select “Register” with [ENTER].
4
To exit the setup, press [SETUP].
NOTES:
• If the setup is completed successfully, “Registered to the
channel list.” is shown on the screen.
• If “Video1” is being used set up will not be completed suc-
cessfully. “Unavailable” will be shown on screen.
Manual Register
Manual Register
For Analog channels,
select a channel to register
using number keys.
For Digital channels,
you must perform Autoscan function.
Register
Ch Change
11
Back
BACK
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
ENTER
AUDIO
STILL
SETUP
BACK
SCREEN
MODE
INFO
1
2
3
4
5
6
7
8
9
-
0
ENTER
SETUP
1
2
3
4
6
7
8
9
-
0
5