Sylvania 6842THG - Manual (Page 31)

31
EN
OPTIONAL SETTINGS / A
T
T
A
CHING A
W
ALL MOUNT BRA
CKET (SOLD SEP
ARA
TEL
Y)
1 Turn the TV over and place it screen-first onto a
table which has a soft cloth draped over it.
Place the TV in a way so that the stands hang
over the edge of the table.
2 Remove the stands from the TV.
Unscrew the M5 screws indicated by
, and
remove the left and right stands.
3 Attach the left and right TV rails to the TV using
the M8 screws included with the wall mount kit.
indicates the position of the screw holes on
the TV.
4
Attach the TV to the wall.
* If you want to attach the stand of this TV again,
insert the stand slowly as illustrated below and
drive screws in the 4 threaded holes (
). 1
2
1
A
TTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
ANT. IN AUDIO OUT AUDIO HDMI COMPONENT2 Y Pb
Pr
L
R AUDIO
Y Pb
Pr
L
R AUDIO L
R AUDIO
VIDEO1 AC IN
S-VIDEO1
COMPONENT1
HDMI IN L
R
L
R DIGITAL AUDIO OUT
(COAXIAL)
2
Stand
Rear of this TV
1 1
# CAUTION
• Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the
manufacturer’s warranty.
• This TV is for use only with the Sanus Systems Model VMPL. Wall Mount. Use with other wall mounts
may result in instability causing possible injury.
NOTE:
• The screws and stands you have removed are neces-
sary for reattachment at a later date. Make sure to
keep them in a safe place.
NOTE:
• Only use the screw holes indicated by for mount-
ing the TV.
• For instructions on how to attach the TV rails, refer to
the instruction manual included with the mount wall
kit.
2
NOTES:
• Make sure to use a table which can support the
weight of the TV and is larger than the TV.
• Make sure the table is in a stable location.
NOTE:
• Refer to the instruction manual included with the
mount wall when securing the TV to the wall.
1