Oregon VR383SX3 - Manual (Page 12)

EN
9
To set alarm time:
1. Press and hold DISP / SET until hour value begins flashing.
2. Use Vol + / Vol - to toggle value
3. Press DISP / SET to confirm value
Turning Alarm Setting On or Off
NOTE: The alarm setting is automatically turned on when the alarm
time has been changed.
Turning Off Ringing Alarm
When the alarm sounds, press any button (except the LASER button)
to stop the ringing. It will also automatically stop after 30 seconds.
NOTE: If the voice recorder is in Recorder Mode, the alarm will not
sound even if it is enabled. Instead, the Alarm Indicator will blink for
30 seconds or until any button is pressed.
Press MODE/
INDEX
Alarm Clock
Press MODE/
INDEX
Press VOL+ /
VOL- to turn
alarm setting
Press
DISP/SET
1. Normal Clock Operation
Press DISP/SET
Press &
hold DISP/SET
Press
DISP/SET
2. Alarm Mode 3. Change the Alarm’s Hour
4. Change the Alarm’s
Minute
5. Return to Alarm
Mode
VR383SX3 En Manl R3(V1.0) OP 12/18/04, 10:49 AM 9
¶´ƒ