Oregon VR383SX3 - Manual (Page 13)

EN
10
FM RADIO (87.5 TO 108MHz)
This product is equipped with a built-in FM Radio system for your
entertainment.
Using the Radio
1. In Clock Mode press MODE / INDEX twice to select Radio Mode,
then press [PLAY] to confirm entering radio channel mode.
2. Use Vol + / Vol - to adjust the volume.
3. Press SKIP to go next preset station.
4. Press PREVIEW to return previous preset station.
5. Press REC to start recording.
Setting Radio Stations
The FM Radio has 30 channels to select from. These can be set
manually or automatically as follows;
1. Press DISP / SET while in Radio mode. The channel number
will disappear.
2. Use SKIP or REVIEW to toggle through frequencies (87.5MHz
to 108MHz). Press and hold SKIP or REVIEW to scan to next
available frequency.
3. Press and hold DISP / SET until “SAVE?” is displayed.
4. Use SKIP or REVIEW to toggle through channel numbers.
5. Press DISP / SET to assign channel number to selected
frequency. Alternatively, press MODE / INDEX to abort save.
NOTE: Listen to the radio using the stereo earphone provided. The
earphone (antenna) must be plugged into the unit so that radio
channels can be received normally. FM scanning reception may vary
in different areas.
VR383SX3 En Manl R3(V1.0) OP 12/18/04, 10:49 AM 10
¶´ƒ