Oregon VR383SX3 - Manual (Page 18)

EN
15
Press MODE / INDEX to return to normal playback.
Introduction Scanning
You can scan the first 5 seconds of all recorded messages within the
current folder. When the unit is in Recorder Mode, and the device is
not in playback or recording:
Press and hold PLAY to enter Introduction Scan Mode. The first five
seconds of every message in the selected folder will be played.
Press PLAY to resume normal playback of a desired message.
Erasing Messages
When the unit is in Recorder Mode, and the device is not in playback
or recording, you can choose to erase the messages stored:
Use SKIP / REVIEW to toggle through messages in folder.
Press ERASE to delete selected message. "ERASE" will begin flashing
on the LCD display.
Press ERASE again to confirm deletion.
Press Press
1. Recorder Mode.
Press SKIP / REVIEW
to choose message.
2. “ERASE” and
currently selected
message blinks.
3. “BUSY” displayed while
message is erased.
Wait 1 second
4. Message erased. Device
returns to Recorder Mode.
VR383SX3 En Manl R3(V1.0) OP 12/18/04, 10:49 AM 15
¶´ƒ