Oki C330 - Manual (Page 39)

39 – C330/C530 Menu Functions
OVERRIDE
A4/LT Yes
NO If enabled, when the paper size of a job is set
to A4 but there is no A4 paper loaded in the
printer, if there is Letter paper in the printer,
the job will print on Letter paper without
requesting the user to fill the paper tray with
A4 paper.
Similarly, when the paper size of a job is set
to Letter but there is no Letter set in the
printer, if there is A4 paper in the printer, the
job will be printed on A4 paper without
requesting the user to fill the paper tray with
Letter paper.
RESOLUTIO
N 600DPI
600x1200D
PI
600DPI
MULTI-
LEVEL.
Sets default resolution.
TONER
SAVE MODE ON
OFF This function works effectively only if the
data input is color RGB data. This setting is
valid in PS and PCL, but does not take effect
in the following cases.
(1) PS: If Color Matching is set OFF.
(2) PS: If any setting other than ASIC Color
Matching is set.
(3) PS: CMYK data when Ink Simulation Mode
is used (valid in any other cases except Case
(1) and Case (2) above as long as data is
RGB).
(4) PCL binary data (Color/Monochrome).
MONO-
PRINT
SPEED
Auto
COLOR
SPEED
NORMAL
SPEED
• Sets the monochrome print speed. Prints
at the most appropriate speed for page
process if Auto is set.
• Prints always at the color print speed if
Color is set.
• Prints always at the monochrome print
speed if Normal is set.
ITEM ACTION EXPLANATION