Oki C330 - Manual (Page 45)

45 – C330/C530 Menu Functions
Color Menu
ITEM ACTION EXPLANATION
DENSITY
CONTROL AUTO
MANUAL If set to AUTO, image density will be auto-
matically adjusted at power on, when a new
image drum or toner cartridge is installed,
and at intervals of 100, 300 and 500 drum
counts. If a 500 drum count interval occurs
during a print job it will occur at the end of
that job, and will take up to 55 seconds. If
set to manual, this adjustment will only be
performed when initiated by the next menu
item.
ADJUST
DENSITY EXECUTE Selecting this will activate adjustment of the
color density.
COLOR
TUNING
PRINT
PATTERN
Selecting this item prints the color tuning
pattern to help you adjust the color balance.
C HIGHLIGHT
C MID-TONE
C DARK
M HIGHLIGHT
M MID-TONE
M DARK
Y HIGHLIGHT
Y MID-TONE
Y DARK
K HIGHLIGHT
K MID-TONE
K DARK -3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3 Adjusts image density for each color compo-
nent (cyan, magenta, yellow and black).
Normal setting is 0.
C DARKNESS
M DARKNESS
Y DARKNESS
K DARKNESS -3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3 Adjusts darkness of each color component
(cyan, magenta, yellow and black). Normal
setting is 0.