Oki C330 - Manual (Page 49)

49 – C330/C530 Menu Functions
PCL Emulation Menu
ITEM ACTION EXPLANATION
FONT SOURCE RESIDENT
RESIDENT
2
Specifies the location of the PCL default font.
Normally this will be INTERNAL unless addi-
tional fonts are installed in the expansion
ROM slot or additional fonts have been
downloaded to RAM as permanent fonts.
FONT NO. I0 ~ 190 Sets the current default font number from
the currently selected source.
FONT PITCH 0.44 CPI ~
10.00 CPI
~ 99.99
CPI
Sets the width of the PCL default font in
characters/inch (CPI).
Default font is the fixed-pitch, scalable font.
The value is displayed to the second decimal
place
Displayed only when the font selected in
Font No. is fixed-spacing, scalable font.
FONT HEIGHT 4.00
POINT ~
12.00
POINT ~
999.75
POINT
Height of the PCL default font.
Note: This menu item is displayed only when
the font selected in Font No. is a propor-
tional-spacing, scalable font.
SYMBOL SET PC-8
(DEFAULT
SYMBOL
SET ONLY
SHOWN)
PCL symbol set. If the font source and num-
ber are changed to one which does not sup-
port the selected symbol set, this must be
changed to an available symbol set for that
font.
A4 PRINT
WIDTH
78
COLUMN
80
COLUMN
Sets the number of columns subject to Auto
LF with A4 paper in PCL. This is the value
when Auto CR/LF Mode is set to OFF with the
10CPI character.
WHITE PAGE
SKIP
OFF
ON Selects whether blank pages are printed or
not.
CR FUNCTION CR
CR + LF Selects whether a received carriage return
character (0Dh) also causes a line feed.
LF FUNCTION LF
LF+CR Selects whether a received line feed charac-
ter (0Ah) also causes a carriage return.