Oricom eco50 - Manual (Page 12)

10 CALLER ID OpERATION
Store a CID number
You can save a CID record into the Phonebook/Direct
memory provided that it contains a valid phone number and
the Phonebook/Direct memory is not full.
While you are viewing the CID record that you wish to save,
1. Press and hold [
] key for about 2 seconds. The
following will appear on the display.
45748888_
2. The space after the last digit of the CID will blink, and
press the numeric keys to edit the CID number and then
press [ ] key to confirm.
3. Press the numeric keys to edit the memory location
(0-9) where you want to store the number. If you made a
mistake, press [ ] key to edit it.
4. Press [ ] key again to confirm and go back to standby
mode.
The record is now saved into the phonebook. Then it goes
back to the call log.
Delete CID record(s)
While you are viewing the CID record that you wish to
delete,
Press and hold [ ] key for about 3 seconds.
Note:
If there are no more CID records, a message “
NO” is
displayed.
Calling a number from the CID records
When you are viewing the CID records,
1. Press [ \ ] or [
R/ ] key to scroll to desired number.
2. Press [ ] key. The number will be dialled automatically.