Oce North America OP1030 - Manual (Page 10)

Page 1-3
3. Click on the FAX TX Setting... button in order to access the Default Setting dialogue box.
4. Click on the Machine Setting tab in order to display its contents.
5. In the Network FAX Address area, enter the IP address, or host name, of the machine that you want to use as the
Network FAX.
NOTE: The IP address/host name that you enter here must be the same as that registered in the scanner default settings
of the machine itself. (Refer to "2. Set-up" in the Operation Guide for your Network Scanner.)
1-1 Installing the Network FAX Driver
6. Click on the OK button.
Sample screen-shot of the
scanner default setting window