Oce North America OP1030 - Manual (Page 36)

Page 3-2
3-1 Summary of Delivery Settings
The following describes the procedure for setting the folder in which documents received by the Network FAX will be stored.
Refer to the procedures starting from "3-2 Starting the Scanner File Utility" for more detailed information on each setting .
The folder that is used for the storage of transmitted documents can also be set using this procedure.
1
Starting up the Scanner File Utility
Use the Start button to start up the Scanner File Utility and double-click
on the icon in the Windows Task Bar in order to access the Scanner File
Utility dialogue box.
-> Refer to page 3-4
2
Setup Dialogue Box
This dialogue box is used to select the management settings for the
destination folder, such as the settings for the capacity of the hard disk, for
the display of the fax reception notification window, etc.
-> Refer to page 3-5
3
Folder Setting Dialogue Box
This dialogue box is used to set the number or the address of the folder in
which received documents will be stored.
-> Refer to page 3-6