O2 Innovations pmn - Manual (Page 25)

TARGET Series ENMET Corporation
22
7.0 Instrument Information
7.1 Replacement Parts List
Replacement Parts:
ENMET Part No. Description
04835-000 Sampling hose
04835-001 Sampling wand
04835-002 Hand aspirator, requires 04835-000 or 04835-001 or both
04833-000 Protective carrying case
04833-003 Alkaline battery holder
66014-003 Charger cable, 12 V DC
73083-007 Economy Black Transit Case with Lining
04832-000 Battery Charger, 100-240 V AC , req. cable 66018-000 or equiv.
66018-000 Power cable for charger, 110 V AC plug
67019-024 Battery Pack, NiMH
04833-002 Internal Pump, is round pump w/crimps & connector
for units with s/n 15-0699 and below
04833-004 Internal Pump, is square pump w/crimps & connector
for units with s/n 15-0700 and above
03620-017 Calibration/hand aspirator cover
04833-001 Computer Cable
04836-000 Sampling cover for internal sample pump
73089-068 Sampling filter
04833-005 Trakker software
80012-014 TARGET Series Operation and Maintenance Manual
Calibration Gas and accessories:
ENMET Part No. Description
03388-000 Calibration Gas, 34 liter, 50% LEL CH
4
, 20ppm H
2
S, 100 ppm CO, 20.9% O
2
03286-100 Calibration Gas, 17 liter, 100ppm Toluene for BRH Sensor
03227-800 Calibration Gas, 17 liter, 800ppm Hydrogen, H
2
03220-050 Calibration Gas, 17 liter, 50% LEL Methane, CH
4
03219-100 Calibration Gas, 17 liter, 100ppm Carbon monoxide, CO
∆
03302-010 Calibration Gas, 34 liter, 10ppm Hydrogen chloride, HCL
03303-010 Calibration Gas, 34 liter, 10ppm Hydrogen cyanide, HCN
03314-020 Calibration Gas, 34 liter, 20ppm Hydrogen sulfide, H
2
S
03315-010 Calibration Gas, 17 liter, 10ppm Sulfur dioxide, SO
2
03318-025 Calibration Gas, 17 liter, 25ppm Ammonia, NH
3
∆
03331-005 Calibration Gas, 17 liter, 5ppm Chlorine, Cl
2
∆
03332-005 Calibration Gas, 34 liter, 5ppm Ethylene oxide, ETO
03334-025 Calibration Gas, 34 liter, 25ppm Nitric oxide, NO
04834-001 Calibration Adapter, Reactive Gases
04834-005 Calibration Adapter, for BRH sensor
03620-017 Calibration Shield
*03510-002 Calibration Adapter, Flow Demand
*Required in use with
∆ calibration gases.
∆
These gases require the Sampling Shield p/n 04836-000 to be in place and pump activated for
accurate detection and calibration.