Olympus P-S100 - Manual (Page 12)

Safety regulations
Re
ad t
h
is f
irs
t
EN-12
CAUTION
Ensure there is adequate ventilation around the printer
Do not put the printer where there is poor ventilation, or on a soft surface such as a rug
or bed.
Do not put the printer on an unstable surface
Do not put the printer on an unstable surface such as a shaky table. Injury may result
from the printer being dropped or falling. This could also damage the printer or cause
the printer to malfunction.
Do not touch the non-user-serviceable parts inside the printer
Doing so may cause injury or burns. This applies especially to children and those
unfamiliar with the printer.
Do not unplug the printer by jerking or pulling on the power
cord
To unplug the power cord, hold it by the plug. Pulling on the cord may damage it,
possibly resulting in fire or electric shock.
Unplug the printer for servicing
Always unplug the printer before servicing or performing maintenance.
Unplug the printer if it will not be used for an extended period
of time
Unplug the printer if it will not be used for an extended period of time, such as while
you are away on a long trip.
Otherwise, deteriorated insulation or current leakage may cause fire or electric shock.
Doya_E.book Page 12 Thursday, November 11, 2004 10:50 AM