Olympus P-S100 - Manual (Page 32)

Loading the paper and replacing the ribbon cartridge
Additiona
l i
n
fo
rm
a
tion
EN-32
Additional information
Loading the paper and replacing the ribbon
cartridge
If paper runs out during printing
The PAPER indicator blinks slowly. Replace the paper-in tray. The remaining data is automatically printed.
Under normal circumstances the ribbon will end at the same time as the paper runs out. Replace the ribbon
cartridge with a new one.
If the ribbon runs out during printing
The RIBBON indicator blinks slowly. Wait until paper is ejected, and then replace the ribbon cartridge with a
new one. When you close the ribbon cartridge door, the remaining data will be automatically printed.
About used paper-in trays and ribbon cartridges
• Used paper-in trays can be used as container boxes for photographs.
• Paper-in trays and ribbon cartridges are made of plastic. When disposing, check local regulations.
Index Sticker
Cap
Doya_E.book Page 32 Thursday, November 11, 2004 10:50 AM