Olympus P-S100 - Manual (Page 19)

Loading the ribbon cartridge
P
rep
a
rat
io
n
EN-19
Loading the ribbon cartridge
About the paper-in tray and the ribbon cartridge
For printing, a paper-in tray and a ribbon cartridge are required (both supplied, as well as commercially
available as replacements).
For details, refer to “About the Paper-in Tray/Ribbon Cartridge” (
gpage 38).
Setting the ribbon cartridge
1
Open the ribbon cartridge door.
2
Remove slack from the ribbon.
If the ribbon cartridge has been used before, take in any ribbon slack before loading.
Notes
• Do not mix ribbon cartridges and paper-in trays that are packaged together.
• Do not use paper that has already been printed on or ejected.
Turn the roll in the direction indicated by the arrow while holding the roller in place.
Doya_E.book Page 19 Thursday, November 11, 2004 10:50 AM