Oki C5800 - Manual (Page 73)

Menu functions> 73
C
OLOUR MENU
The printer automatically adjusts colour balance and density at
appropriate intervals, optimising the printed output for bright
white paper viewed in natural daylight conditions. The items on
this menu provide a means of changing the default settings for
special or particularly difficult print jobs. Settings revert to their
default values when the next print job is complete.
I TEM S ETTINGS E XPLANATION
DENSITY
CONTROL AUTO
MANUAL If set to AUTO, image density will be
automatically adjusted at power on,
when a new image drum or toner
cartridge is installed, and at intervals
of 100, 300 and 500 drum counts. If
a 500 drum count interval occurs
during a print job it will occur at the
end of that job, and will take up to
55 seconds. If set to manual, this
adjustment will only be performed
when initiated by the next menu
item.
ADJUST
DENSITY EXECUTE Selecting this will permit adjustment
of the colour density.
AJST
REGISTRATION EXECUTE Performs automatic colour
registration adjustment. Normally
this is done on power on and when
the top cover is opened and then
closed. This process accurately
aligns the cyan, magenta and yellow
images to the black image.
C REG FINE
AJST
M REG FINE
AJST
Y REG FINE
AJST
-3~0~+3
-3~0~+3
-3~0~+3
Performs fine adjustment of image
timing in relation to the black image
component.