Oki C5800 - Manual (Page 75)

Menu functions> 75
USB
MENU
This menu controls the operation of the printer’s USB data
interface.
N
ETWORK MENU
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
I TEM S ETTINGS E XPLANATION
SOFT RESET ENABLE /
DISABLE Enables or disables the SOFT RESET
command.
SERIAL NUMBER ENABLE /
DISABLE
SPEED 12 / 480 Mps Selects the interface speed
I TEM S ETTINGS E XPLANATION
TCP/IP ENABLE /
DISABLE Enables or disables this network
protocol.
NETBEUI ENABLE /
DISABLE Enables or disables this network
protocol.
IP ADDRESS
SET AUTO / MANUAL Specifies whether IP address
allocation is automatic (DHCP) or
manually assigned.
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To
change, press ENTER and use + / –
keys to increment 1st octet, then
press ENTER again to move on to
next octet. When 4th octet has been
set, press ENTER again to register
new address.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS xxx.xxx.xxx.xxx Current assigned gateway address.
To change, proceed as above.
FACTORY
DEFAULTS EXECUTE Reloads the settings present when
the unit was setup by the
manufacturer.
WEB ENABLE /
DISABLE Enables or disables Web config.
facility.
TELNET ENABLE /
DISABLE Enables or disables Telnet config.
facility.