Oki C5800 - Manual (Page 76)

Menu functions> 76
M
AINTENANCE MENU
This menu provides access to various printer maintenance
functions.
FTP ENABLE /
DEFAULT Enables or disables communication
via FTP.
SNMP ENABLE /
DISABLE Enables or disables SNMP protocol.
NETWORK
SCALE NORMAL /
SMALL Selects network size.
HUB LINK
SETTING AUTO
NEGOTIATE
100BASE-TX
FULL
100BASE-TX
HALF
10BASE-T FULL
10BASE-T HALF Sets full or half duplex for
communication via a network hub.
I TEM S ETTINGS E XPLANATION
I TEM S ETTINGS E XPLANATION
MENU RESET EXECUTE Resets menus to default settings.
SAVE MENU EXECUTE Saves current menu settings as
default values. At confirmation
prompt, press ENTER to confirm
save, or CANCEL to cancel.
POWER SAVE ENABLE /
DISABLE Enables or disables automatic power
save mode. Delay before entering
this mode is set in the system
configuration menu.
PAPER BLACK
SETTING –2~0~+2 Used for small adjustment when you
experience faded print or light
specks / streaking in monochrome
printing on white paper. Select a
higher value to reduce fading, or a
lower value to reduce specks or
streaking in high density print areas.
PAPER COLOR
SETTING –2~0~+2 As above, but for colour printing.
TRANSPR
BLACK SETTING –2~0~+2 As above but for mono printing on
transparencies.
TRANSPR
COLOR SETTING –2~0~+2 As above but for colour printing on
transparencies.