Sony SLV-SE210B - Manual (Page 20)

20 Presetting channels
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (RÉGL.FIN)
function. After step 4, press
M/m to select RÉGL.FIN. Press </, to get a
clear picture, then press MENU to exit the menu.
Tip
• To set the programme position for the decoder, see “Setting the Canal Plus
channels” on page 26.
Note
• When adjusting RÉGL.FIN, the menu may become difficult to read due to
interference from the picture being received.
8 Enter the station name.
1 Press M/m to select a character.
Each time you press M, the character
changes as shown below.
A t B t … t Z t 0 t 1 t
… t 9 t A
2 Press , to set the next
character.
The next space is flashed.
To correct a character, press
</, until the character you want to
correct is flashed, then reset it.
You can set up to 4 characters for the station name.
9 Press OK to confirm the station name.
10 Press MENU to exit the menu.
OK
LECTURE
S Y S . : L / L ’
S T
R É G L . F I N
D E C O D E U R : –
: N O N
: 5
: 0 3 3
: O – – –
M E N U : O K : F I N
S É L E C T .
C A N A L
N O M
:
S O R T I E
R E C H E R C H E M A N U E L L E
R É G L E R :
OK
LECTURE
MENU