Sony SLV-SE210B - Manual (Page 49)

49 Editing with another VCR
A
d
ditio
n
al Op
er
atio
ns
Note
• If the other VCR does not have a PERITEL connector, use the VMC-2106HG
cable instead and connect the cable to the line out jacks of the other VCR.
Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to video input.
• Press CHOIX ENTREE to display the
connected line in the display window.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X (pause) on this VCR when an
unwanted scene begins. When it ends, press X (pause) again to resume recording.
1 Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause).
3 Press z ENR on this VCR to set it to recording pause.
4 To start editing, press the X (pause) buttons on both VCRs at the same
time.
X
z ENR