Sony SLV-SE210B - Manual (Page 40)

40 Recording TV programmes using the timer
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 30).
• Display tape information on the TV screen (page 32).
• Check the timer settings (page 43).
• Watch another TV programme (page 32).
Tips
• Even if you set OPTIONS PROG. to SHOWVIEW in the RÉGLAGES
UTILISATEUR menu, you can set the timer manually. Press MENU to select
MINUTERIE, then go to step 2.
• To check, change, or cancel the programme setting, see “Checking/changing/
cancelling timer settings” (page 43).
Notes
• When setting the timer with PDC signals, enter the start and stop times exactly as
indicated in the TV programme guide. Otherwise, the PDC function won’t work*.
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC
signals, the VCR will start recording at the set time without using the PDC
function*.
• The and indicators flash in the display window when you press ?/1 with
no tape inserted.
• The PDC function is automatically set to off for the timer recording of a satellite
programme*.
* SLV-SE210B only