Oki C 5300n - Manual (Page 97)

C5300 Menu Functions • 97
Print Menu
Note: Factory default settings are shown in bold.
Item Settings Explanation
COPIES 1 to 999 Enter the number of copies of
a document to be printed.
DUPLEX ON
OFF
Turns the duplex (2-sided)
printing function on or off if
this option is installed.
PAPER FEED TRAY1
TRAY2
MP TRAY
Selects the default tray for
paper feed.
AUTO TRAY
SWITCH
ON
OFF
If two trays contain identical
print media, the printer can
switch to an alternate tray
when the current tray runs out
in the middle of a print job.
TRAY SEQUENCE DOWN
UP
PAPER FEED TRAY
Sets the sequence in which
the printer will seek an
alternate tray with the same
media size should the
currently selected tray run out
of media while printing a job.
MP TRAY USAGE DO NOT USE
WHEN MISMATCH
XXX
If a document to be printed
demands a paper size not
installed in the selected tray,
the printer can automatically
feed from the Multi-Purpose
Tray instead. If this function is
not enabled, the printer will
stop and request that the
correct size be loaded.
MEDIA CHECK ENABLE
DISABLE
Set to DISABLE if you do not
wish the printer to check to
see if the size paper loaded in
the selected tray matches that
required for the document
being printed.