Onkyo CR-315DAB - Manual (Page 28)

28
Basic Operation—Continued
On the CR-515DAB, you can also use the [TONE] but-
ton and multi control on the front panel to adjust the bass
and treble.
To turn on the Super
Bass function, press
the [S.BASS] button.
The S.BASS indicator lights
up.
To turn off the Super Bass function, press the [S.BASS]
button again.
On the CR-515DAB, you can also use the [TONE] but-
ton on the front panel. Press the [TONE] button for 3
seconds to turn on the Super Bass function.
Note:
If you press the [S.BASS] button while the Direct func-
tion is on, the Direct function will be turned off.
To turn the Direct function on or off, press
the [DIRECT] button on the CD receiver.
When the Direct function is off, the tone
controls can be used to adjust the sound.
When the Direct function is on, the tone
controls are bypassed, so you can enjoy a
pure sound, and the DIRECT indicator lights up.
On the remote controller, press the [TONE] button for 3
seconds to turn on the Direct function.
On the CR-515DAB, the [DIRECT] button’s indicator
lights up when the Direct function is on.
To mute the output of the
CD receiver, press the
remote controller’s [MUT-
ING] button. The MUTING
indicator flashes on the dis-
play.
On the CR-515DAB, the volume control indicator
flashes, too.
To unmute the CD receiver, press the [MUTING] button
again.
Tips:
While the CD receiver is muted:
• Turning the [VOLUME] control on the CD receiver or
pressing the VOLUME [ ]/[ ] buttons on the
remote controller will unmute the CD receiver.
• If you turn the CD receiver off, the next time you turn
it on, the CD receiver will be unmuted.
MUTING S.BASS
/
TONE
ENTER
DIRECT
DIRECT TONE
CR-515DAB
CR-315DAB
Adjusting the Bass and Treble
1 Press the [TONE] button to select
Bass.
2 Use the Previous and Next
[
]/[ ] buttons to adjust the
bass.
The default setting is “±0.” You can
adjust the bass and treble from –3 to +3.
Press [ENTER], and then use the
Previous and Next [
]/[ ] but-
tons to adjust the treble.
Notes:
• If you press no buttons for 8 seconds,
the previous display will appear auto-
matically.
• If you press the [TONE] button while
the Direct function is on, the Direct
function will be turned off.
Using the Super Bass Function
Using the Direct Function
Muting the Sound
DIRECT indicator
MUTING indicator