Onkyo CR-315DAB - Manual (Page 52)

52
Using the Timers—Continued
Notes:
• You must set the clock before you can program the
timers.
• Before programming a timer to turn on the radio, you
must preset the station you want to use. (See pages 43
and 44.)
• If you don’t operate any buttons for 60 seconds while
programming a timer, the procedure will be cancelled
and the previous display will reappear.
Programming the Timers
1 Press the [TIMER] button repeat-
edly to select timer 1, 2, 3, or 4, and
then press [ENTER].
If “Clock” appears, you need to set the
clock (see page 26).
2 Use the Previous and Next [ ]/
[ ] buttons to select Play or
Rec, and then press [ENTER].
If you can’t select Rec, make sure that
your Onkyo cassette deck or MD
recorder is properly connected to the
MD/TAPE jacks (pages 20 and 21) and
the Input Display is set accordingly
(page 29).
/
TIMER
STANDBY/ON
ENTER
Number buttons
or
3 Use the Previous and Next [ ]/
[ ] buttons to select the source,
and then press [ENTER].
You can select the following sources:
CR-515DAB
FM, AM, TAPE, DOCK, LINE1, LINE2,
DIGITAL, CD, or DAB.
CR-315DAB
FM, AM, TAPE, DOCK, LINE, CD, or
DAB.
If you selected Rec, CD cannot be
selected as the source.
4 If you selected AM, FM, or DAB,
use the Previous and Next [
]/
[ ] buttons to select the radio
preset, and then press [ENTER].
5 If you selected Rec, make sure the
name of the connected recorder is
flashing on the display, and then
press [ENTER].
You can select TAPE or MD.
6 Use the Previous and Next [ ]/
[ ] buttons to select Once or
Every, and then press [ENTER].
Select Once for on-off operation. Select
Every to perform the same operation
every week.