Onkyo CR-445 - Manual (Page 13)

Connecting Antennas
13
This section explains how to connect the supplied
indoor FM antenna and AM loop antenna, and how to
connect commercially available outdoor FM antenna.
The CD receiver won’t pick up any radio signals
without an antenna connected, so you must connect
the antenna to use the tuner.
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use
only.
1 Attach the FM antenna, as shown.
2 Use thumbtacks or something
similar to fix the FM antenna into
position.
Caution:
Be careful that you don’t injure yourself
when using thumbtacks.
If you cannot achieve good reception with the
supplied indoor FM antenna, try a commercially
available outdoor FM antenna instead (see page 14).
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor
use only.
1 Assemble the AM loop antenna,
inserting the tabs into the base, as
shown.
2 Connect the terminal of the AM loop
antenna to the AM antenna jack, as
shown.
Insert the plug
fully into the jack.
Thumbtacks, etc.
FM antenna jack
AM antenna jack