Onkyo CR-445 - Manual (Page 31)

Listening to the Radio—Continued
31
Displaying FM/ AM Radio Information
Press the remote controller’s [DISPLAY] button
repeatedly to display more radio information.
FM / AM Frequency
* If the selected preset has no name, “No Name”
appears briefly and then the frequency is
displayed. See “Naming Presets” on page 33.
Presetting FM Stations Automatically
(Auto Preset)
With the Auto Preset function, you can automatically
preset the FM radio stations available in your area in
one go. Presets make it easy to select your favorite
stations and eliminate the need to tune the radio
manually each time you want to change stations. The
Auto Preset function does not preset AM radio
stations.
1 Press the [TUNER] or INPUT [ ] /
[ ] buttons repeatedly until “FM”
appears.
Make sure the FM antenna is positioned to
achieve the best possible reception.
2 Press the [MENU / CLEAR] button,
and then use the [
] / [ ]
buttons to select “Auto Preset?”.
3 Press [ENTER].
The confirmation message “Auto Preset??”
appears.
To cancel the Auto Preset function at this
point, press the [MENU / CLEAR] button.
4 To start the Auto Preset function,
press [ENTER].
Note:
Depending on your location, a preset may be stored
with no station and you will hear only noise when
you select it. In this case, delete the preset (see page
34).
Presetting FM / AM Stations Manually
With the Preset Write function, you can manually
preset individual FM and AM radio stations. Presets
make it easy to select your favorite stations and
eliminate the need to tune the radio manually each
time you want to change stations.
FM stations can also be preset automatically (see
page 31).
Preset name *
Any existing presets will be deleted when the
Auto Preset function is run.
Auto Preset Caution!
• You can store up to 40 stations as presets and
this can be any combination of FM and AM
stations. For example, 27 FM and 13 AM or
32 FM and 8 AM.
• Although FM and AM presets share the same
numbers, they’re selected independently. For
example, preset #1 will store an FM station
when the FM band is selected, and an AM
station when the AM band is selected.
• Stations can be stored to presets in any order.
For example, you could store preset #5 first,
#1 second, and so on.
About Presets