Oricom S209 - Manual (Page 11)

- 7 -
Getting Started
CONNECTING YOUR PHONE
1. Connect the output plug of the mains adapter to the bottom
of the base unit.
2. Connect the mains adapter to a standard wall outlet.
3. Connect the telephone line cords to the phone sockets
(Line 1 & Line 2) on the side of the base unit and the wall
phone sockets.
SMS is supported on Line 1 only. Connect the SMS-enabled PSTN telephone line cord to Line 1.
4. Connect the auxiliary device such as a Fax, eftpost
terminal, phone, or answering system (not supplied) to the
AUX socket.
The auxiliary corded phone maybe used on Line 1 for calls
during power failure situation.
CONNECTING YOUR CHARGER
1. Connect the power adapter of the charger to a powerpoint.
CHARGING YOUR HANDSET
1. Place the 2 rechargeable batteries (included) into the
battery compartment.
2. Slide the battery door firmly into place.
CAUTION: Check the batteries polarity when inserting the batteries. Incorrect polarity may damage the
product.
WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-
rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed
of in accordance with the applicable waste disposal regulations.
NOTE: Charge the handset(s) for 14 hours before initial use!