Oricom S209 - Manual (Page 48)

- 44 -
The System
REVIEWING/SELECTING YOUR COUNTRY
The country setting of your phone has been set during the initial set up of your phone. You can review the current country setting on
your phone.
1. Press
MENU
.
2. Select SYSTEM. Press
OK
.
3. Select COUNTRY SETTINGS. Press OK.
4. Press
OK
when finished.
If you want to make changes to the country setting, you have to first reset your phone (refer to Resetting to default settings on page 46).
For instruction on selecting country after reset, refer to Selecting your country on page 9.
REGISTERING YOUR HANDSET(S) WITH ADDITIONAL BASE
This section shows you how to register your handset to additional base unit(s). If your handset displays NOT REG, refer to Registering your
handset on page 9.
1. Press MENU .
2. Select SYSTEM. Press OK .
3. Select REGISTER. Press OK .
4. Select the base number you want. Press OK. This base number will be assigned to the base unit you are about to register
to.
5. Enter the system PIN. Use DELETE to make correction.
6. Press
OK to confirm. Your handset starts searching for the base.
7. Press
PAGE
on the base unit for 4 seconds. The base unit sounds 2 short beeps. The registration process shall be
completed within 30 seconds.
SELECTING A BASE UNIT
You can switch your handset between different base units if your handset has registered to these base units. For your convenience, you
can program the handset to automatically connect to the closest base unit. You can also program the handset to only connect to a
fixed base unit you have specified.
1. Press
MENU
.
2. Select SYSTEM. Press
OK
.
3. Select SELECT BASE. Press OK.
4. Select the base unit you want or select AUTO if you want your handset to automatically connect to the closet base unit.
5. Press
OK . The new setting is saved.
DELETING A HANDSET
Use one handset to delete (de-register) another handset that shares the same base unit.
1. Press MENU .
2. Select SYSTEM. Press OK .
3. Select DELETE HANDSET. Press OK.
4. Select the handset you want to delete. Press OK.
TIP: Use UP and DOWN to navigate the menus.
NOTE: Each handset can register up to 4 base units. After registering 4 base units, your handset
registration memory is full. When you register to an additional base unit, your new registration will replace
an old one.