OTC Wireless 802.11 Wireless Serial Solutions WiSER2400.IP - Manual (Page 26)

WiSER 2400 Technical Manual Version 2.16 Copyright  2001-2005, OTC Wireless, Inc. All Rights Reserved Page 26 of 32
3.4.4 Peer Host
Destination Unit
MAC Address: The MAC address of the destination device.
IP Address: The destination IP address of the device that the
WiSER2400 radio is set to communicate with. For TCP
server and UDP modes, the IP Address can be left as
0.0.0.0. In TCP client mode, a valid IP address is
required.
Listen Port: The port number the destination device listens on to
receive the TCP/UDP packets.
Note: The Peer Host is normally the computer on which the
serial device’s application program is run.
Fig. 17 WiSER2400 administration software
Configuration/Peer Host panel