Onkyo TX-SR875 - Manual (Page 46)

46
First Time Setup —Continued
If you connect your TV to the COMPONENT VIDEO
OUT, set the HDMI Monitor setting to No so that the
onscreen setup menus are displayed and composite
video and S-Video sources are upconverted and output
by the COMPONENT VIDEO OUT.
If you connect your TV to the HDMI OUT, set the HDMI
Monitor setting to Yes so that the onscreen setup menus
are displayed and composite video, S-Video, and com-
ponent video sources are upconverted and output by the
HDMI OUT.
On the TX-SR875, you can specify the output resolution
for the HDMI OUT and COMPONENT VIDEO OUT
and have the AV receiver upconvert the picture resolu-
tion as necessary to match the resolution supported by
your TV.
HDMI Monitor Setup
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
INPUT SELECTOR
LISTENING MODE
ON STANDBY
DISPLAY MUTING
GU IDE EXI T
PREV
CH
DIMMER
CDR/MD
SAT TAPE/AMP
SLEEP
MACRO
REMOTE MODE
SUBTITLE AUDIO REPEAT PLAY MODE
--/--- 10 11 12
TV
TV CH
TV VOL
PLAYLIST RANDOM
DVD
AUX 1 AUX 2 GAME/TV
CBL/SAT VCR/DVR
D. TUN
CD TUNER TAPE
PHONO
REC
ENTER
SURR
DIRECT THX PURE A
STEREO
ALL ST
TO P M ENU MEN
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE DOCK
DVD
RECEIVER
CD
+
-
1 2 3 ZONE 3
ZONE 2
INPUT
+
-
+10 0 CLEAR
1 2 3
4 5 6
7 8 9
SE TUP RET UR N
2, 3 2–5
1
1, 6
RECEIVER
SE
TUP
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Input/Output
Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
3 Use the Up and Down [ ]/[ ]
buttons to select “1. Monitor
Out,” and then press [ENTER].
The Monitor Out menu appears.
Note:
• The Resolution Through ( * ) setting
is not available on the TX-SR805.
4 Use the Up and Down [ ]/[ ]
buttons to select “HDMI Monitor,”
and use the Left and Right
[
]/[ ] buttons to select:
No: Select this if your TV is con-
nected to the COMPONENT
VIDEO MONITOR OUT, S
MONITOR OUT, or V MON-
ITOR OUT.
Yes: Select this if your TV is con-
nected to the HDMI OUT.
Note:
• When Yes is selected, the onscreen
setup menus are output by only the
HDMI OUT. If you’re not using the
HDMI OUT and select Yes by mis-
take and the menus disappear, press
the AV receiver’s [HDMI OUT] but-
ton so that “HDMI Monitor: No”
appears on the display.
If you have the TX-SR805, press
the [SETUP] button to close
setup.
If you have the TX-SR875, con-
tinue with the next step.
ENTER
ENTER
ENTER
ENTER
1-1.Monitor Out
HDMI Monitor Yes
Resolution Through
( * )
ENTER
ENTER