Onkyo TX-SR875 - Manual (Page 48)

48
First Time Setup —Continued
If you connect a video component to an HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
By default, none of the HDMI inputs are assigned. The
following input selectors can be assigned: DVD,
VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2,
TAPE, TUNER, CD, PHONO.
If you’ve connected your TV to the AV receiver with an
HDMI cable, you can set the AV receiver so that com-
posite video, S-Video, and component video sources are
upconverted (
* ) and output by the HDMI OUT. You can
set this for each input selector by selecting the “- - -”
option.
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component video
upconversion for the HDMI OUT, the HDMI Monitor
setting must be set to Yes (see page 46). See page 28
for more information on video signal flow and upcon-
version.
HDMI Input Setup
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
INPUT SELECTOR
LISTENING MODE
DISPLAY MUTING
GU IDE EXI T
PREV
CH
DIMMER
CDR/MD
SAT TAPE/AMP
SLEEP
MACRO
REMOTE MODE
SUBTITLE AUDIO REPEAT PLAY MODE
--/--- 10 11 12
TV VOL
PLAYLIST RANDOM
D. TUN
CD TUNER TAPE
PHONO
REC
ENTER
SURR
DIRECT THX PURE A
STEREO
ALL ST
TO P M ENU MEN
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE DOCK
DVD
RECEIVER
CD
1 2 3 ZONE 3
ZONE 2
+
-
+10 0 CLEAR
4 5 6
7 8 9
SE TUP RET UR N
2, 3 2–4
1
1, 5
IN
OUT
( * )
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
RECEIVER
SE
TUP
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Input/Output
Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
3 Use the Up and Down [ ]/[ ]
buttons to select “2. HDMI Input,”
and then press [ENTER].
The HDMI Input menu appears.
4 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[ ] buttons to select:
IN1: Select if the video component
is connected to HDMI IN 1.
IN2: Select if the video component
is connected to HDMI IN 2.
IN3: Select if the video component
is connected to HDMI IN 3.
IN4: Select if the video component
is connected to HDMI IN 4.
(TX-SR875 only.)
- - -: Select this to upconvert and
output composite video,
S-Video, and component
video sources from the HDMI
OUT.
5 Press the [SETUP] button.
Setup closes.
ENTER
ENTER
ENTER
ENTER
1-2.HDMI Input
DVD ---
VCR/DVR ---
CBL/SAT ---
GAME/TV ---
AUX1 ---
AUX2 ---
ENTER
ENTER
SE
TUP