Oricom TP110 - Manual (Page 10)

10
6.2.2 Dialling from the Phone Book
1. Press .
2. Scroll to the required memory location using or . To quick-search in
the Phone Book press the corresponding number button one or more
times for the first letter (refer to the table on the previous page).
3. Press CALL BACK or SPEAKER to dial the displayed number. If you do
nothing the phone will return to standby mode.
6.2.3 Changing phone numbers/names
1. Press .
2. Scroll to the required memory location using or
.
3. Press and hold STORE until EDIT? is displayed. Press STORE.
4. Changes to the displayed telephone number can be made using DELETE
and or . Press STORE.
5. Changes to the displayed name can be made using DELETE and or
.
6. Press STORE to confirm the changes.
6.2.4 Deleting a phone book entry
1. Press .
2. Scroll to the required memory location using or
.
3. Press DELETE. DELETE? will be displayed.
4. Press and hold DELETE until the displayed telephone number
disappears.
7 Using the phone memories
The telephone also has 12 additional memory locations for frequently dialled
telephone number.
7.1 Storing M1 and M2 Memories
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits). Press STORE
button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter (see the above table). Press
STORE button.
4. Press either M1-M2 to store the number.
7.2 Dialling using M1 and M2 Memories
1. Lift the handset or press SPEAKER button and wait for a dialling tone.
2. Press either M1-M2, the stored telephone number will now be dialled.