Oricom PMR3000 - Manual (Page 18)

18
Operation
To set dual channel and code
1. Press until display.
2. Pressing the
or button will increase or decrease the
dual channel.
3. Press again and then press or button to increase
or decrease the dual code number.
4. Press to exit the menu and save the dual channel and code
combination.
When the Dual Channel Monitor function is activated, the PMR will
switch sequentially between the standby channel + CTCSS and the
Dual Channel + CTCSS. When there is activity on the Dual Channel
+ CTCSS, the active channel will be displayed for 5 seconds. Within
this period, you have the possibility to answer the transmission.
To disable the dual channel scan
Repeat the setup 1 and 2, and then roll-over at ‘ ’ which means
the dual scan is disabled.
Hands-free use (VOX)
This feature allows you to transmit “hands-free” by talking while
using the VOX headsets connected to the radio.
Note: When using the headsets with your radio, turn your radio off
before you place the accessory on your head or in your ear.
How to use VOX
1. Turn off your radio.
2. Insert the VOX headset into the headset socket.
3. Turn on your radio; the VOX icon will appear in the display.
4. To transmit, speak into the headset mircophone. To receive,
stop talking.
5. Pressing button or removing VOX headset will disable VOX
function.