Oricom PMR3000 - Manual (Page 19)

19
Operation
Hands-free use (IVOX)
This feature allows you to transmit “hands-free” by talking into the
radio microphone without using the headset.
How to use the IVOX feature
1. Press button until VOX appears.
2. Press
or button to “ ” to disable the IVOX or enable
IVOX by select level 1, 2 or 3.
3. Press button to confirm your setting.
4. At standby mode, when IVOX function activated, to transmit,
speak into the radio microphone. To receive, stop talking.
5. Press will disable IVOX operation.
Note: There is a short delay after you start talking, before the radio
transmits.
Setting VOX and IVOX sensitivity levels
Adjusting your radio’s VOX and IVOX microphone sensitivity level
helps to minimize the possibility of unintended noises triggering a
transmission, and enhances the ability to pick up quiet voices. If
a headset is fitted to your radio these instructions will help you to
adjust the VOX sensitivity.
1. Press until VOX and a flashing number appears in the
centre of the display. With the headset connected you will see
in the top right corner of the display. Without the headset
you will see I.
2. Select sensitivity level 1, 2 or 3 by using or . Choose -
1- If you speak loudly, or are in a noisy environment.
2- Suitable for most applications.
3- If you speak softly, or are in a quiet environment.
Note: When you connect a VOX headset, the radio will
automatically be set to the last chosen VOX sensitivity level.
If IVOX is active, the radio will automatically select IVOX level.