Oricom PMR3000 - Manual (Page 20)

20
Operation
Monitor function
This feature allows you to listen for weak signals on the current
channel.
1. Pressing and holding
allows you to monitor your channel
for activity.
Note: It is good radio etiquette to monitor the channel for activity
before you transmit, to ensure that you do not interrupt other
users already on the channel.
Baby monitor function
One of the units can be set as Baby monitor. The radio will transmit
a signal when it is activated by the crying baby or another sound in
the room.
The PMR will no longer be able to receive signals to avoid that your
baby is disturbed during his/her sleep.
The other PMR must be set to the same channel and CTCSS code
to receive the signal from the Baby Monitor.
To set your radio as baby monitor
1. Press button until appears.
2. Press
or button to set baby monitor sensitivity level to
1/2/3 to turn baby monitor function ON.
3. Press to confirm the setting.
Note:
1. In standby mode, when speaking into the microphone, the
radio will automatically transmit like IVOX does.
2. The radio can’t receive or if you press any key it will not
generate key tones so that you will not disturb the baby.
To disable baby monitor function
1. Press button until appears.
2. Press
or until OF appears.
3. Press to confirm the setting.