Olympus MAUSB-10 - Manual (Page 8)

8
<98/98 SE/Me
ࡗInstall>
4. During installation, the window at right appears.
* The installation time may vary, depending on your
computer.
5. When the driver installation is complete, the
window at right appears.
Click the “Finish” button.
The device driver is now installed.
Once the driver has been installed, the MAUSB-10 will be recognized automatically whenever it is plugged into
the computer. (Remove the CD-ROM from the CD-ROM drive and store it in a safe place.)
6. The window at right appears. Select “Yes, I want
to restart my computer now.” if you are ready,
then click “Finish”.
* The computer restarts.