Oricom WNS1 - Manual (Page 7)

SETTING THE TIME ( )
SETTING THE ALARM TIME ( )
SETTING THE ALARM MODE
Put the function switch on A+T position. Choose which
alarm mode you wish to be awakened to by moving the
alarm mode switch to one of the following selections:
V : only shaker activated
V+S : both sound and shaker alarm activated
F+V : both strobe light and shaker alarm activated
ALARM AND CLOCK FUNCTION
- 5 -
Press and hold (set clock) button.
Press H (hour) and M (minute) until correct hour
and minutes appear on the display.
Release (set clock) button.
For p.m. hours, the p.m. indicator will appear on
the display near the inscription PM.
Press and hold (set alarm) button.
Press H (hour) or M (minute) until correct hour and
minutes appear on the display.
Release (set alarm) button.
Press , H and M to reset the alarm clock to 12.
-
-
-
-