OTC Wireless WiSER2400 - Manual (Page 6)

WiSER2400 WiFi Radio
Specifications
Model WiSER2400
Standard 802.11 and 802.11b
Host Interface RS232
Frequency 2.4GHz – 2.495GHz
RF Channels 11 channels (US, Canada), 13 channels (Europe), 14 channels
(Japan)
Transmission power 14dBm at antenna input typical
Receiver sensitivity -80dBm @1e-5 BER typical
Antenna Integrated dipole antenna with ~2dBi gain
Data Rate 11, 5.5, 2 or 1 Mbps fixed rate, or configured to automatic rate
selection
Modulation CCK, Direct Sequence Spread Spectrum
Link Distance ~1200 ft in open space
Network Types Support dedicated point-to-point link, the ad hoc mode and the
infrastructure mode
Data Encryption Support the standard 64-bit and the 128-bit WEP
Network Security MAC-address-based access control
AC adapter Output: 5V, 1A; Input: 100-120V, 50-60Hz, ~0.3A
Current consumption <480mA (max. reached in transmit-mode)
LED Indicators 4: Power, Transmission, Receiving, Link
Operating
Temperature -10°C – 50°C
Regulation
Compliance FCC part 15,Class B
CE ( ETSI EN 300 328-1, ETSI EN 301 489-17)
3
Key Features
Configurable as either an Access Point or a Station
Configurable as a dedicated pair of radios to replace a RS232 cable connection
Plug & Play operation—
o No driver on the host device is required for radio operation
o Radio operation is independent of the operating system on the host equipment or device
(Windows 98/2000/ME, Linux, Unix, embedded, etc.), as long as a RS232 port is properly
supported
Automatic clear channel selection when configured to operate as a dedicated radio pair
Supports 64-bit and 128-bit encryption for secured communication
Industry standard IEEE 802.11b-compliant wireless interface; Interoperable with AP and Client
radios from other vendors)
Enable a RS232-interfaced equipment to participate in an Ethernet network via an 802.11b-
compliant Access Point
11Mbps data rate and automatic selection of lower data rate (5.5, 2 and 1 Mbps) in degraded RF
Applications
Standard-compliant wireless networking for computers and equipment with a RS232 interface
Where Plug & Play is essential
o As rental Internet-access devices in public space—Hotels, motels, cyber-café, airport lounges, etc
o As rental Internet-access devices at trade shows, large meetings and other one-time events
o As shared Internet-access devices for visitors to an office
Embedded devices, tools, instruments, equipment and appliances that can benefit from the re-
configurability of wireless link yet are unfriendly to the installation of device-drivers
o POS equipment for stores where re-configuration is frequent
o Control/monitor equipment where mobility is required