OTC Wireless WiSER2400 - Manual (Page 9)

Installation of WiSER2400 Software
System Requirements
To use the WiSER2400 Wireless Ethernet Adapter’s utilities software, your
computer must meet the following minimum requirements:
Windows® 95 (OSR2)/ 98 (SEC)/ME/2000/XP
One COM port (with a DB-9 male connector or an appropriate adapter to connect
to a DB-9 female connector)
Installation
To install the utility program, simply insert the CD-ROM provided copy the
“WiSERUti.exe” file to the desired location on your PC.
Notice that the operation of the WiSER2400 radio is independent of the Utility
Program. Therefore, it is NOT necessary to install the Utility on the RS232
equipment/computer that connects to a WiSER2400 radio. For example, if you
connect an electronic whiteboard wirelessly to a network using a pair of
WiSER2400 radios, you need not to install Utility Program on the whiteboard and
you will not be able to! You can configure the WiSER2400 radio on a PC installed
with the Utility Program, disconnect it from the PC, and then connect it to the
whiteboard. While the Utility program must run on a computer equipped with
Microsoft Windows, the radio can operate with computers/equipment of any OS.
6
Also, notice that to configure or monitor the radio with the Utility program,
the computer cannot be running another program that also access the
same COM port.