Onkyo TX SR805 - Manual (Page 51)

51
First Time Setup —Continued
Notes:
• For composite video and S-Video upconversion for the
COMPONENT VIDEO OUT, the HDMI Monitor set-
ting must be set to No (see page 46). See page 28 for
more information on video signal flow and upconver-
sion.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
If you connect an -capable Onkyo MiniDisc
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
jacks, or connect an RI Dock to the GAME/TV jacks, for
to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
Note:
• DOCK can be selected for the TAPE input selector or
GAME/TV input selector, but not both at the same
time.
5 Press the [SETUP] button.
Setup closes.
SE
TUP
Changing the Input Display
1 Press the [TAPE] or [GAME/TV]
input selector button so that
“TAPE” or “GAME/TV” appears
on the display.
2 Press and hold down the [TAPE]
or [GAME/TV] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
DOCK.
For the TAPE input selector, the setting
changes in this order:
For the GAME/TV input selector, the
setting changes in this order:
GAME/TV
↔
DOCK
STANDBY/ON
MASTER VOLUME
CD TUNER TAPE CBL/SAT GAME/TV AUX 1 AUX 2 VCR/DVR DVD AUDIO SEL PURE AUDIO PHONO DISPLAY
PUSH TO OPEN
STANDBY
READY
ZONE 2
ZONE 3
OFF TONE HDMI OUT
DIGITAL INPUT
ZONE 2
ZONE 3
LEVEL PHONES POWER
ON OFF
STEREO THX
RT/PTY/TP MEMORY
LISTENING MODE
TUNING MODE SETUP
PRESET
TUNING
TUNING RETURN
ENTER
SETUP MIC
VIDEO S VIDEO DIGITAL
AUX 2 INPUT
AUDIO L R CLEAR
1, 2 1, 2
TAPE
GAME/TV
or
TAPE
GAME/TV
or
TAPE
→
MD
→
CDR
DOCK
→
→