Input setup – Onkyo TX-SR601E User Manual

Page 54

Advertising
background image

54

Input Setup

The listening mode will be reset to the mode you set here after
turning on the TX-SR701/701E/601/601E even if you change the
listening mode using the LISTENING MODE buttons.

When you set this setting to “Last Valid”, the listening mode will be
the one you used before.

Notes:

• For “e. PCM fs 96kHz source” “f. Digital Format source” “g.

D. F. Mono source”
These settings will be disabled if “----” is selected at the
“Digital Input” setting.

• For “e. PCM fs 96kHz source” “g. D. F. Mono source”

The selected listening mode will be applied to all the input
source signals of the same type.

d. Analog/PCM/D. F. 2ch source
This sets the listening mode for analog, PCM, or Digital Format 2ch
sources.
Analog sources consist of LP records, FM and AM broadcasts,
cassette tapes, and the such. PCM (Pulse Code Modulation) is one
form of digital audio signals and is recorded directly onto compact
discs and DVDs without compression.
Digital format 2ch is a 2-channel digital source, such as DVD or LD
which is recorded in 2-channel Dolby Digital format (but for PCM).

e. PCM fs 96kHz source
This sets the listening mode for Digital PCM sources recorded with
a sampling rate of 96 kHz.

f. Digital Format source
This sets the listening mode for Dolby Digital or DTS sources.

g. D. F. Mono source
This setting allows you to select the listening mode for digital mono
source.
Digital format mono is monaural digital source, such as DVD or LD
which is recorded in Dolby Digital mono format.

Relationship between input source and listening mode

*1

TX-SR701/701E only

*2

Not Available when the input source is the D.F. 2ch source.

*3

Available when the Dolby Digital EX setting is set to “Auto” with the software having an EX flag or set to “On” (see pages 48, 50).

*4

Available when the DTS-ES setting is set to “Auto” with the software having a DTS-ES flag or set to “On” (see pages 48, 50).

*5

If the source cannot be mixed down, the listening mode will change to the DTS 96/24.

*6

Plays back in ordinary DTS (48 kHz) format.

Note:

You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source.

Input source signal

d. Analog/PCM/

D.F. 2ch source

e. PCM

fs 96kHz

source

f. Digital Format source

g. D.F. Mono source

Dolby Digital

DTS

Dolby Digital/DTS

Monaural

5.1 ch

5.1 ch

6.1 ch

96/24

Type of software

Listening Mode

Tape, Video tape,

Vinyl, Tuner, CD,

MD, DVD (Stereo),

LD, Digital Satellite

DVD

(96kHz/

24bit)

DVD

Digital Satellite

CD, LD,

DVD

DVD

DVD

DVD

Pure Audio

*1

*2

Direct

*2

Stereo

Mono

*2

T-D

*6

Surround

PL II Movie

PL II Music

DTS Neo:6 Cinema

DTS Neo:6 Music

PL II (T-D)

Dolby Digital

Dolby Digital EX

*3

DTS

DTS-ES

Matrix 6.1

*4

DTS

DTS-ES

Discrete 6.1

*4

DTS 96/24

*5

DTS-ES

*6

THX

*1

PL II (THX)

DTS Neo:6 (THX)

THX Cinema

THX Surr EX

THX Cinema

DTS-ES

Matrix 6.1

(THX)

THX Cinema

DTS-ES

Discrete 6.1

(THX)

THX Cinema

*6

DTS-ES

(THX)

*6

Orchestra

*6

Unplugged

*6

Studio-Mix

*6

TV Logic

*6

Enhance

*6

Mono Movie

All Ch St

Advertising
This manual is related to the following products: