Onkyo TX-SR601E - Manual (Page 41)

41
Selecting an Audio Component
STANDBY/ON
PHONES VIDEO 4 INPUT
DIGITAL
VIDEO 3 TAPE VIDEO 4
SURROUND THX DSP STEREO
STANDBY
DISPLAY
VIDEO 2 DVD VIDEO 1 AUDIO SELECTOR
LISTENING MODE
MASTER VOLUME RETURN
ENTER
AUDIO ADJUST SETUP
RT/PTY/TP
VCR 2 VCR 1 S VIDEO VIDEO AUDIO L R
OFF ON
POWER
TUNER CD PHONO DIRECT/ PURE AUDIO PURE AUDIO
REC OUT ZONE 2 OFF LEVEL MEMORY
CLEAR
FM MODE
PRESET
TUNI NG
MASTER VOLUME
VOL
RCVR
MODE
TX-SR701/701E
Input source buttons
INPUT SELECTOR
buttons
If you want to perform these operations using the remote controller,
first press the RCVR MODE button.
1. Press the desired input source.
The selected source name appears on the display. See “Enjoying
DVD multichannel audio playback” (see page 44) when a DVD
player with a 5.1-channel input port is connected to the TX-
SR701/701E/601/601E.
2. Start playing the selected input source.
Follow the operating instructions for the source device.
3. Adjust the volume to an appropriate level.
Adjusting the main volume adjusts the volume level of all the
speakers connected to the TX-SR701/701E/601/601E together. If
headphones are connected, this also adjusts the volume heard from
the headphone speakers. To adjust the volume, either press the
VOL
buttons on the remote controller or turn the MASTER
VOLUME dial. To increase the volume, turn the dial clockwise; to
decrease the volume, turn the dial counterclockwise. The volume
can be set to Min, 1 to 99, and Max.
Basic operation
VIDEO 3 TAPE VIDEO 4 VIDEO 2 DVD VIDEO 1
VCR 2 VCR 1
TUNER CD PHONO
TX-SR701/701E
TX-SR601/601E
Remote controller
VIDEO 3 TAPE TUNER VIDEO 4 VIDEO 2 DVD VIDEO 1
VCR 2 VCR 1
C D
MASTER VOLUME
TX-SR701/701E/601/601E Remote controller
• For information about selecting the listening mode, see pages
46-51.
• You can set the sound quality using the Audio Adjust menu.
(See page 57 for more information.)
If no audio output is heard from the digital source (DVD, CD,
etc.) you have selected, see “Digital Input” on page 52.