Onkyo TX-SR601E - Manual (Page 57)

57
Audio Adjust
STANDBY/ON
PHONES VIDEO 4 INPUT
DIGITAL
VIDEO 3 TAPE VIDEO 4
SURROUND THX DSP STEREO
STANDBY
DISPLAY
VIDEO 2 DVD VIDEO 1 AUDIO SELECTOR
LISTENING MODE
MASTER VOLUME RETURN
ENTER
AUDIO ADJUST SETUP
RT/PTY/TP
VCR 2 VCR 1 S VIDEO VIDEO AUDIO L R
OFF ON
POWER
TUNER CD PHONO DIRECT/ PURE AUDIO
PURE AUDIO
REC OUT ZONE 2 OFF LEVEL MEMORY
CLEAR
FM MODE
PRESET
TUNI NG
AUDIO ADJUST
/ / /
AUDIO ADJUST
/ / /
These settings are enabled depending on the listening mode or input
signal.
Setup Procedure
1. Press the AUDIO ADJUST button.
The Audio Adjust settings appear in the front display and on the
monitor.
Note:
The items that appear in the menu depend on the currently selected
listening mode or the input signal.
2. Use the and cursor buttons to select the item that
you want to set.
3. Use the and cursor buttons to set the value.
Setting Values Initial value
Bass –12 to +12 0
Treble –12 to +12 0
LFE Level* – ∞, –10 to 0 dB 0 dB
Double Bass On, Off On
Late Night Off, Low, High Off
Center Image 0, 1, 2, 3, 4, 5 3
Panorama On, Off Off
Dimension 0, 1, 2, 3, 4, 5, 6 3
Center Width 0, 1, 2, 3, 4, 5, 6, 7 3
Front Effect On/Off On
Reverb Level Low/Middle/High Middle
Reverb Time Short/Middle/Long Middle
Input Channel L+R/Left/Right L+R
Academy* On/Off Off
Listening Angle 20°/40° 40°
Center On/Off Off
Front Expand On/Off Off
Bass : 0dB
Treble : 0dB
* TX-SR701/701E only
Bass, Treble
Separately adjust the bass and treble settings in 2-step increments.
The Bass and Treble adjustments are only enabled for the front left
and right speakers.
Note:
If Direct, Pure Audio (TX-SR701/701E only), or THX (TX-SR701/
701E only) is selected as the listening mode, these settings cannot
be made. To make these settings, first select another listening mode.
Double Bass
The Double Bass function boosts the bass sound by letting the bass
sound of “Front L/R” speakers output also from the subwoofer. To
enable this function, in the “Speaker Config” menu, set the
“Subwoofer” to “Yes” and “FrontL/R” to “Large.”
The Double Bass function is effective especially when the input is
monaural, 2-channel or PCM 96kHz signal.
On: Select to turn on the Double Bass function.
Off: Select to turn off the Double Bass function.
Late Night
The audio for movies made for the cinema have a large dynamic
range; thus, the difference between loud noises and soft noises is
great. To hear the quieter sounds such as background noises or
human conversations, the movie must be played back at larger
volumes. When this setting is set to “High” or “Low,” the dynamic
range of the sound is narrowed down to allow you to easily hear
minute sounds at low volumes. This function is especially useful if
you wish to play a movie at low volumes during the nighttime.
This can be set to either “Off” or “Low,” or “High.” When this
setting is set to “High” or “Low,” the dynamic range of the sound is
narrowed down to allow you to easily hear minute sounds at low
volume.
Off: Select to turn off the Late Night function.
Low: Select to narrow down the dynamic range.
High: Select to further narrow down the dynamic range.
Notes:
• The Late Night function is effective only on Dolby Digital
encoded software.
• The depth of the Late Night effect is determined by Dolby
Digital software. With some sources, it may produce little or no
effect.
Dialog Enhance On/Off Off
Virtual Surround
Level
–3 to +3 0
Setting Values Initial value