Onkyo TX-SR601E - Manual (Page 69)

69
Operating your programmed remote controller
After entering a pre-programming by following the procedure
given above, the following modes become enabled for use.
VOL
ON STANDBY
MUTING
MENU
CH
ENTER
SAT/MD MODE
ENTER,
Numeric keys
VOL
ON STANDBY
MUTING
CH
ENTER
CABLE MODE
Numeric keys
Operations are the same as explained on page 64.
1. Press the SAT/MD MODE button.
The SAT/MD MODE button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off satellite tuner unit (same as STANDBY
button on the remote controller)
CH : Changes selected preset channel
: Moves cursor
ENTER: Confirms selection
MENU: Displays menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
: Adjusts the volume at the TX-SR701/701E/601/601E
MUTING: Activates the muting function at the TX-SR701/701E/
601/601E
1. Press the CABLE MODE button.
The CABLE MODE button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off cable TV unit (same as STANDBY button on
the remote controller)
CH : Changes selected preset channel
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
: Adjusts the volume at the TX-SR701/701E/601/601E
MUTING: Activates the muting function at the TX-SR701/701E/
601/601E
DVD MODE (DVD Player Mode)
SAT MODE (Satellite Tuner Mode)
CABLE MODE (Cable Mode)