OxiBrands Integrated High Definition LCD Television 40E220U - Manual (Page 27)

27 Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception of
high-definition video signals. Because this is an evolving
technology, it is possible that some devices may not operate properly
with the TV.
The HDMI ® input can accept and display VGA, SVGA, XGA,
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal
specifications, see
“HDMI® signal formats” on page 122 .
Supported Audio format: Linear PCM, sampling rate 32/44.1/48
kHz.
To connect a computer to the HDMI ® input, see “Connection to the
TV’s HDMI® terminal” on page 33 .
To connect an HDMI ® device, you will need one HDMI ® cable
(type A connector) per HDMI ® device.
❖
For proper operation, it is recommended that you use an
HDMI
® cable with the HDMI ® Logo ( ).
❖
HDMI ® cables transfer both video and audio. Separate analog
audio cables are not required. See “Setting the HDMI® audio
mode” on page 50 .
(Sample Illustration) Connecting an HDMI ® device
NOTE
NOTE
TV back panel
Playback device