OxiBrands Integrated High Definition LCD Television 40E220U - Manual (Page 28)

28 Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
To view the HDMI ® device video:
Select HDMI 1 or HDMI 2 video input source on the TV. Press the
INPUT button on the remote control. For more information, see
“Selecting the video input source” on page 54 .
To connect a DVI device, you will need:
❖
HDMI ® to DVI adapter cable
For proper operation, the length of an HDMI ® to DVI adapter
cable should not exceed 9.8 ft (3m). The recommended length
is 6.6 ft (2m).
❖
3.5mm Stereo to RCA Y-cable
An HDMI
® to DVI adapter cable transfers video only. Separate
analog audio cables are required (see illustration).
For more information, see
“Setting the HDMI® audio mode”
on page 50
(Sample Illustration) Connecting to a DVI device
To ensure that the HDMI ® or DVI device is reset properly:
❖ When turning on your electronic components, turn on the TV
first, and then the HDMI
® or DVI device.
❖ When turning off your electronic components, turn off the
HDMI
® or DVI device first, and then the TV.
VIDEO AUDIO
L R
R L
OUT
IN
DVI / HDCP
OUT
IN
NOTE