Optimus STAV-3790 - Manual (Page 17)

17
Initial Setup
To obtain the best possible surround sound, you need to set up and
adjust your receiver and its components. This is particularly important
when you use the
(Dolby) sound mode. These are one-time adjust-
ments and you need not to repeat (unless you change the configuration
of your system).
Basic Procedure 1. Press POWER ( RECEIVER POWER ) to turn on the receiver.
2. Press RECEIVER located in the center of the remote control to acti-
vate remote setup.
3. Press or until the component you want to adjust appears on
the display. We recommend that you perform adjustments in the
order that they appear on the display when you initially set up the
receiver.
4. Press ▲ or ▼ to select the option of the displayed component. The
setting is automatically entered.
5. Repeat Steps 3 and 4 to adjust the other components.
Speaker Size Setting
1. Press until F.L.--C.L.--S.L. appears on the display.
2. Select the front speaker size using ▲ or ▼. If your speaker systems
have a 5-inch or larger cone or if you have not connected a sub-
woofer, select
L (large). The receiver sends the bass frequencies to
the front speakers. If you use smaller speaker systems, select S
(small): the receiver sends bass frequencies to the subwoofer.
3. Press to move the cursor to the right and select the center
speaker size by pressing ▲ or ▼. Choose L for a 5-inch or larger
cone, S for a smaller cone, or ✱ if you did not connect a center
speaker. When you select ✱, the center speaker signals are sent to
left and right front speakers.
4. Press to move the cursor to the right and select the surround
speaker size using ▲ or ▼: L if they are 5-inch or larger, S if they
are smaller, or ✱ if you did not connect surround speakers. When
you select ✱, the surround speaker signals are sent to the left and
right front speakers.
Subwoofer On/Off Setting
Press until SUBWF ON appears on the display and press ▲ or ▼ to
turn the subwoofer on or off.
Notes:
• When you select S for front speakers,
you cannot select L for center or sur-
round speakers.
• When you set the front speakers to S ,
the SUBWF sets to ON .
31-3046.fm Page 17 Monday, January 29, 2001 12:43 PM